`Remember me on this computer` option

Select the `Remember me on this computer` option if you wish to be automatically logged on to the computer in future. Your account will remain active for 45 days. Please do not use the `Remember me` option if using a computer with public access or that is used by more than one person.

Apeks

Apeks Octopus XTX 40 Nitrox

Apeks Octopus XTX 40 Nitrox

  • Apeks Octopus XTX 40 Nitrox
  • Apeks Octopus XTX 40 Nitrox
  • Apeks Octopus XTX 40 Nitrox

Apeks Octopus XTX 40 Nitrox

View more related products to:

Product description Apeks Octopus XTX 40 Nitrox

Apeks Nitrox regulators are suitable for use with up to 100% O2 and are colour-coded for easy identification.

The regulators have been specially cleaned and assembled in our purpose built class J (10,000) Clean Room using oxygen safe components and lubricants and are available in yoke (A) clamp or DIN fitting.

Although the XTX40 is a mid-range Apeks regulator, it is still classed as a high performance regulator in independent reviews. The XTX40 comes with all the features of our highly successful XTX50 with the exception of diver adjustable breathing resistance control.


Features:

- Nitrox equipment will be supplied in Europe in accordance with the EN 144-3 and the EN13949 which states that equipment sold in CEE (European Community) countries over 21% and up to 100% will be manufactured with the special M26 fitting.
- The first stage has four medium-pressure ports all mounted on a rotating turret. This results in optimal hose routing while eliminating sharp bends in the hose.
- Features an innovative Diver Changeable Exhaust system (DCE). The system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. Only the narrow exhaust tee is supplied with the regulator.
- Optional 5th port is available for sidemount or twin cylinder set ups. Can be converted from a right-handed hose configuration to a left handed configuration. The process of changing the regulator to a left-handed configuration is both quick and simple. However, this procedure must ONLY be performed by an APEKS Authorised Service Technician.
- Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable.
- Suitable for coldwater use (below 10 C / 50 F).
- Compatible with EAN40 out of the box.

First Stage:
- Use the DST first stage.
- Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
- 2 HP ports and 4 MP ports on a rotating turret are angled for optimum hose routing.
- An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.

Second Stage:
- Pneumatically-balanced second stage results in smooth, easy breathing.
- The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
- The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
- Easy-to-grip opening effort control knob keeps the diver in control.
- The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
- A silicone exhaust valve improves the breathing performance of the regulator.
- The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue.
- A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.

Specifications:

- Connections: Yoke and DIN available
- Type of first stage: Over-balanced diaphragm design, environmentally sealed
- Body Type: MP ports mounted on swivel turret
- Number of HP ports: 2 (7/16' UNF)
- Number of MP ports: 4 with 5th port option (3/8' UNF)
- Environmental Dry Kit: Standard
- First stage exterior: Chrome over marine brass
- Orientation: Convertible LH or RH
- Coldwater Use: Yes
- Type of second stage: Pneumatically balanced
- Integrated Venturi Lever: Yes
- Mouthpiece: Comfo-bite™
- Exhaust tee: Diver Changeable - supplied with small exhaust tee only.
- Heat Exchanger for freezing resistance: Yes
- Hose type: Braided Flexi-hose
- Overall work of breathing (WOB) scores: Avg. 0.85 joules/liter
- Nitrox compatible: Yes to 40% O2 when new, out of the box / Can be O2 cleaned to 100%.
- Weight: Yoke 1230g / DIN 1100g




If you want to purchase the best Regulators products of Apeks, you have found the best place at scubastore. At scubastore we always work with the best brands like Apeks to provide you with the best quality and best price on all our dive products like Apeks Octopus XTX 40 Nitrox. Place your order now and receive Apeks Octopus XTX 40 Nitrox as fast as possible.

Features Apeks Octopus XTX 40 Nitrox

Customer reviews and questions (1)

Write a review about this product and earn CoINNs (existing customers only)

Write a review or ask our dedicated team of experts a question

Product rating

Note: Your reviews will be reviewed by our staff and posted within five working days. Your question will be answered by email, so please make sure your email address is correct.

I accept your Privacy Policy

RECOMMENDED FOR YOU

See all products