`Remember me on this computer` option

Select the `Remember me on this computer` option if you wish to be automatically logged on to the computer in future. Your account will remain active for 45 days. Please do not use the `Remember me` option if using a computer with public access or that is used by more than one person.

Apeks

Apeks MTX-R DIN

  • Apeks MTX-R DIN
  • Apeks MTX-R DIN
  • Apeks MTX-R DIN

Apeks MTX-R DIN

Product description Apeks MTX-R DIN

The MTX-R is based on the MTX military regulator and is a super tough, rugged, high performance, go anywhere regulator. The MTX-R has excellent cold water performance and has a greatly reduced risk of free flow. This has been achieved by improving several areas, including an innovative endcap solution that solves a long-challenged reality for cold-water divers of first stage freeze up. This regulator is designed to meet all aspects of the NEDU (Navy Experimental Dive Unit) military requirements for diving in very cold water. The MTX-R is highly reliable and also very easy to service out in the field.


Features:

- Unique over-balanced diaphragm design as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a faster rate than ambient. This - results in superior performance at depth
- Compact environmentally dry sealed diaphragm system completely eliminating the maintenance issues associated with silicone, oil or grease filling
- Break through, innovative over-moulded first-stage endcap & environmental diaphragm helps prevent ice build-up that can cause first stage free flow in extreme circumstances. Also - protects the first stage from impact damage
- Easy to grip DIN hand-wheel or over-moulded yoke hand-wheel, only requires one hand to release
- DIN, Yoke and M26 Thread available, 300bar, 232bar and M26 300bar (O2) respectively
- 5 x 3/8? UNF (Unified National Fine) medium pressure ports
- 2 x 7/16? UNF high pressure ports
- The 5th 3/8? UNFmedium pressure port includes a protective bumper when not in use
- Forged first stage body with heat exchanging ribs for maximum thermal performance
- Angled HP ports for optimal hose routing and fitting of transmitters
- Forged rotating turret with medium pressure ports in a parallel direction for improved hose orientation
- Ribbed diaphragm clamp for improved heat exchange in cold water conditions
- Double swivel hose for greater freedom of movement and comfort
- Tested for Octopus use - EN250A to 60 meters cold water
- Nitrox/Oxygen compatible Up to 40% O2 outside the EU (European Union), within the EU anything above 21% O2 must use an M26 Connection
- Simple to use with no dive adjustment controls and reduced chance of free flow occurrence, pre-settable cracking effort or venturi control by an Apeksapproved qualified technician
- High performance pneumatically balanced lever operated poppet valve
- Large, diver friendly self-flushing controllable purge button
- Front cover with over-moulded elastomer incorporates a formed chrome plated brass plate improving durability of the second stage
- Large protective elastomer bumpers on the side and on the top to protect the second stage from impacts and scratches in the most vulnerable places
- Reversible second stage for either a left or right hand gas supply configuration
- A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water
- Removable bungee necklace with lock out feature for retaining second stage in the mouth of an unconscious diver during rescue and to assist with jaw fatigue
- Features an innovative Diver Changeable Exhaust system (DCE). The system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. The regulator is - supplied with both sets of exhaust tees
- Comfo-bite mouthpiece
- Flexible nylon braided hose has better cold water performance than traditional rubber hose


Specifications:


Weight:
- DIN 1.193 kg (2.63lbs)
- Max working pressures 1st Stage: DIN - 300 bar (4351 psi) Yoke - 232 bar (3365 psi) second Stage: 9-10 bar (131-145 psi)
Part No.s:
- AP0060 MTX-R 1st and second stage with yoke
- AP0061 MTX-R 1st and second stage with DIN
- AP0063 MTX-R 1st stage DIN connection
- AP0062 MTX-R 1st stage yoke connection
- AP0064 MTX-R second stage
Temp range
- 32.9°F - 12.778°F
- 0.5°C - 55°C
- Connection Types: DIN and Yoke
Key features:
- Cold water use
- Easy to use
- Durable & reliable
- Intended use: Recreational, technical and extreme cold water diving
- WOB: 1.75 J/l
- Nitrox/Oxygen compatible: Up to 40% O2 outside the EU (European Union), within the EU anything above 21% O2 must use an M26 Connection




Would like to buy Apeks MTX-R DIN? You are at the right place! In the category of Regulators set at the online dive store you can find a big variety of different models at the best price. Find the best dive products, that adapt to your needs at scubastore. Are you looking for a gift? Don´t miss also our Regulators sales.

Features Apeks MTX-R DIN

Presence of octopus
LP Number of outputs
HP Number of outputs
Type of connection
Regulators features
Color

Customer reviews and questions (2)

Write a review about this product and earn CoINNs (existing customers only)

Write a review and earn CoINNs

(existing customers only)

Comment

-

beautiful product unbeatable value for money fast shipping meets expectations

Comment

-

beautiful product unbeatable value for money fast shipping meets expectations

Write a review or ask our dedicated team of experts a question

Product rating

Note: Your reviews will be reviewed by our staff and posted within five working days. Your question will be answered by email, so please make sure your email address is correct.

I accept your Privacy Policy

Close