Situation: Accueil > Photo - video > Digital

Sea And Sea Strobe YS-250 PRO

Sea And Sea Distributeur autorisé

Garantie complète du fabricant

TAILLE

COULEUR

Disponible pour livraison (Information Livraison)

-60 mtrs

(w/battery&c..

En stock

1076.73 US$

Quantité:

Description et caractéristiques Sea And Sea Strobe YS-250 PRO

Sea And Sea Strobe YS-250 PRO:

YS-250PRO

Our new YS flagship model for professionals is fast and powerful with broad coverage: guide number 32, beam angle 105.

Amazing power to help you capture any subject you aim at.

The YS-250PRO is designed for demanding professionals, packed with revolutionary new features to meet the challenges of digital photography. A large circular arc tube emits a powerful flash at guide number 32 (its value on land, ISO 100/m) when power is set to FULL.

It provides incremental manual flash power adjustment in 12 steps for graduations of light. The YS-250PRO is lightning fast: it recycles in 1.8 seconds. Its high-capacity Ni-MH battery, designed exclusively for the strobe, stores enough power when fully charged for 200 full flashes. A high-luminosity white LED target light in the center of the strobe shows precisely where the strobe is pointed, and a ready lamp and a TTL confirmation lamp on each side of the strobe indicate when the strobe is charged and when it has been controlled by the camera-s TTL.

An audible signal sounds when the lamps light so you can concentrate on your subject in the viewfinder.

Specifications

[ YS-250PRO Housing ]
[Guide Number (ISO 100/m) (land)] 32
[Beam Angle] 105°x 105° (with diffuser)
[Batteries] Battery for YS-250PRO
[Number of Flashes*1] 200
[Recycle time (full)*2] 1.8
[Color temperature] 5,600K
[Color temperature w/diffuser] 5,200K
[Depth rating] 60m / 200ft
[Dimensions (WxHxD)] 107x130x223mm / 4.3x5.2x9inch
[Weight] 1,780g / 62.3oz
[Underwater weight] -80g / -2.8oz
[Others]
□Exposure control: TTL, Manual(Light-level control)
GN 0.7/1/1.4/2/2.8/4/5.6/8/11/16/22/32 (12 steps)
- Pre-flash control: Equipped with pre-flash cancel mode
- Slave function
- Sync cord: 5-pin Sync cord/N17100, Fiber-Optic Cable (L-type) (optional)
- Over-pressure relief valve
- LED target light
- Test flash function
- TTL / READY confirmation audible signal

*1 Number of flashes and recycle time depends on the battery brand, temperature and frequency of use.
*2 Number of flashes and recycle time of Ni-MH batteries were tested on 2700mAh batteries.