Du är här: Start > Lampor > Led-lampor
Beskrivning och funktioner för Dive Rite LED RX2 Canister Light
Dive Rite LED RX2 Canister Light:
The RX2 is Dive Rite’s most advanced lighting system utilizing an intelligent microprocessor control unit that keeps the light operating at peak efficiency. The smart controller features:
* Battery State-of-Charge Monitoring
* Low Battery Indication at Turn On
* Temperature Monitoring for Device Protection
* OFF – HIGH – LOW Selection via Rotary Switch
Unique in the marketplace is the RX2s dual power selector switch now located on the light head instead of the canister.
This provides easy access to switch power modes on the fly. At full power, the RX2 has a four hour burn time and eight hours at half power.
**However, using smart technology, the RX2’s microprocessor “thinks” for the diver and automatically switches from full power to half power to extend battery run-time while maintaining usable light (see chart located in DOWNLOADS for power management details).
A key added safety feature is the battery check function. The diver can easily check battery state-of-charge by simply switching the unit on.
If the unit flashes three rapid pulses, the diver knows that the battery is low before the dive.
In addition, heat-sensing technology enables the light to be used out of the water safely and reliably as the RX2 continuously monitors heat emission from the LEDs.
The light will automatically reduce output preventing the LEDs from overheating, a common issue for LEDs in an enclosed fixture.
This allows the diver to use the light on land post-dive at the campsite, boat dock, or any land-based activity requiring illumination.
The RX2 employs four, Luxeon® Rebel™ LEDs at a system lumen rating of 880 lumens at full power. At one meter, the RX2 boasts a LUX rating greater than 11,000 lumens (see DOWNLOADS and TECH SPECS for a complete listing of technical data and specifications).
Designed for technical diving, the RX2 sports a tight 10-degree beam that is useful for signaling, yet covers enough area to illuminate the surrounding environment for better awareness as well as viewing pleasure.
The RX2 comes standard with a Goodman metal hand mount (elastic hand mount available upon request).
The RX2 NiMH batteries do not contain lithium and therefore are not subject to TSA travel restrictions.
NiMH charger comes standard with a US power cord and automatically adjusts to 110/220 volts AC and 50/60Hz frequency.
Other power cords are available upon request.
The Dive Rite RX2 is proudly designed, manufactured, and assembled in the USA and is RoHS compliant to European environmental standards.
880 system lumens @ full power
Lux ratings: 11,440 @ 1 meter, 2,800 @ 2 meters, 1,320 @ 3 meters
Luxeon® Rebel™ 4 LED array, 10,000 hour life, RoHS compliant to European standards
Color Correlated Temperature (CCT): 6,500 Kelvin
Power Consumption - 12Watts @ maximum output using a 12v 4500ma NiMH slimline battery. Does not fall under TSA travel restrictions. NiMH charger automatically adjusts to 110/220 volts AC and 50/60Hz frequency. US power cord is standard while other cords available upon request.
4-hour burn time at full power; 8-hour burn time at half power (All burn times stated using fresh conditioned batteries).
When battery drops to 11.2v, light auto switches to 50% power. At 10.2V-8V light auto switches to 25% power. Light output tapers until battery drops to 8V at which point the unit shuts down to protect the battery from cell reversal.
Rotary switch located on light head selects full power, half power and off settings.
Depth rating - 500 feet (152 m)
Ships standard with Goodman metal hand mount. Elastic hand mount available upon request.
Includes protective case.
3.8 lbs (1.72 kg) including battery, Buoyancy (-1.25 lbs)
Slimline canister: 9”(L) x 2.6” (dia.)
[22.86 cm x 6.60 cm]
MANUAL
Kunder som köpt Dive Rite LED RX2 Canister Light
Kunder som tittat på Dive Rite LED RX2 Canister Light har också tittat på:
ÅSIKT
HANDLA VIA
Avdelning
Varumärke
