Information om Apeks ATX 50 + ATX 40
Apeks ATX 50 + ATX 40 :
ATX-50 is a high performance regulator that boasts an over-balanced first stage with a pneumatically balanced second stage.
Four medium pressure ports are located on a swivel turret to reduce tension on the hoses. The primary port is enlarged for maximum flow.
Two high-pressure ports are available for redundancy.
The first stage is dry-sealed keeping all internal components protected from the environment.
Can be easily changed to a DIN connection system.
The new ATX50 second stage is smaller and 25% lighter than its TX50 predecessor. This results in less jaw fatigue and less drag.
Improved exhaust gas flow reduces exhalation resistance and therefore, the overall work of breathing of the regulator.
The ATX50 second stage uses a pneumatically balanced valve system and is the most advanced diver-adjustable breathing system available.
The ATX50 has ergonomically designed diver-adjustable controls for opening effort and venturi assistance allowing the diver to tune the breathing characteristics of the regulator to give virtually ideal breathing. No fixed or present system can achieve an ideal level of breathing performance under all conditions.
The ATX50 second stage is suitable for use in all diving conditions. Because of its high efficiency heat exchanger system, it can cope with even the coldest conditions without freezing, making the perfect all round regulator.
Comes standard with the Comfo-bit mouthpiece for increased comfort.
The new ATX40 octopus is smaller and 25% lighter than its TX predecessor. This results in less jaw fatigue and less drag.
This pneumatically balanced octopus is ideally suited for an over-balanced Apeks first stage.
The diver has full control of the venturi by means of a lever so as to prevent accidental freeflow when the octopus is not being used.
The excellent coldwater performance of this octopus is due to the highly efficient heat exchanger on the second stage.
High visibility 36" yellow hose and high visibility yellow cover
Kunder som tittat på har också tittat på:
Bli först med att lägga ett omdöme på den här produkten
What about ds4 first stage?
Would love to buy this in DIN if you offered it with the DS4 first stage... there is a huge market for this combination as it is one of the best combinations for tech/cave/wreck/any diving around, yet we are forced to beg scrap steal and borrow to get the ATX50 and ATX40 second stages with a DS4!!! DS4 is by far the favored tech reg over the ATX's standard DST...
Would also like with ds4
I too would like to buy these regs with a DS4 - it doesn't have the stupid 1/2" port
Ok, but what about the atx w/ ds4?
But what if we want the ATX series second stage, not the TX?
Why is pic not same
The pic shows a TX 50 not ATX 50 why?
The "add a review" is a tool for visitors to our site to share their good or bad experiences on products. It's impossible for us to answer any questions over the review option, specially if you don't enter your email. For any tecnical or comercial questions please send a mail to email@example.com Thanks! ps: oops, we will change the picture
Apeks atx 50 + atx 40
I have used the ATX50/40 with DST 1st stage for a few months now and I think it is more practical and durable than the DS4. If your hoses take a knock in an overhead environment etc, around the 1st stage, the swivel turret acts to minimise any damage. Also when configuring a pony it is much easier threading hoses around your main cylinder when it has the DST on. I also find that training exercises like the DM kit swap during buddy breathing a lot easier with the swivel turret.
La mejor atención personal que se le puede pedir a una tienda. Resolvieron todas mis dudas y me enviaron el pedido en 48 hs. Francamente satisfecho (mil gracias Patricia)